Wheel Cleaner Buy 4 get 1 free

Built for professionals who demand results, SB3 Coatings Heavy Duty Wheel Cleaner is a powerful sodium hydroxide-based formula engineered to eliminate the toughest contamination. Brake dust, carbon buildup, road film, and grease are rapidly broken down on contact, restoring wheels and tires with speed and efficiency.

Designed to complement the SB3 system, this high-performance cleaner reduces labor time while delivering consistent, dependable results in even the most demanding environments. Ideal for severely neglected wheels, fleet vehicles, and pre-coating prep, it provides the deep clean required before correction or protection.

Key Features:

• Professional-grade sodium hydroxide formula for extreme cleaning power
• Rapidly dissolves heavy brake dust, grease, and road contamination
• Minimizes agitation and speeds up workflow
• Perfect for pre-coating prep and restoration work
• Trusted performance for detailing professionals and high-volume shops

Directions for Use

Professional Use Recommended – Use Proper PPE (gloves & eye protection)

1. Pre-Rinse Surface
   Thoroughly rinse wheels and tires to remove loose debris and cool the surface. Do not apply to hot surfaces.
2. Dilution Guidelines
   • Heavy contamination: Use as-is or dilute 1:1
   • Moderate cleaning: Dilute 3:1 (water:product)
   • Maintenance cleaning: Dilute up to 5:1
3. Application
   Apply evenly to the wheel and tire surface using a sprayer. Work from the bottom up to ensure even coverage.
4. Dwell Time
   Allow 30–60 seconds for the product to break down contamination. Do not allow to dry.
5. Agitation (If Needed)
   Use a soft wheel brush, tire brush, or wash mitt for stubborn buildup.
6. Rinse Thoroughly
   Rinse completely using high-pressure water to remove all product residue.
7. Repeat if Necessary
   For heavily neglected surfaces, repeat the process as needed.

Important Surface & Safety Information

• Not safe for raw, polished, anodized, or uncoated aluminum
• Avoid use on compromised or delicate finishes
• Always test in an inconspicuous area prior to full application
• Do not allow product to dry on any surface
• Store in a cool, dry place